Test your connection to our network

Measure latency and speed from your location to our San José data center with our speed test, a 100 MB file, ping and traceroute, and what to send support.

These tests measure the path between your location and our data center in San José, Costa Rica. Use them before you order, to see the latency your visitors or users will get, or when a site or server feels slow.

Run the speed test

Open speedtest.crservers.com and click Start test. It takes about 30 seconds and shows:

Result What it means
Ping Round-trip time from your device to San José, in milliseconds. Lower is better.
Jitter How much the ping varies. Low jitter matters for voice, video and games.
Download Speed from our network to you, in megabits per second.
Upload Speed from you to our network.

The test server is capped at 150 Mbps in total, shared by everyone testing at the same time. A result near 150 Mbps is the limit of the test server, not of our network or your connection. For a clean result, test over a cable instead of Wi-Fi and close large downloads first.

If the page says the test server is busy, too many tests are running at once: try again in a minute.

Download a test file

To measure a single long download, for example from a server you already have elsewhere, download our 100 MB test file:

curl -o /dev/null https://speedtest.crservers.com/100mb.test

wget -O /dev/null https://speedtest.crservers.com/100mb.test works too. Both show the average speed when they finish.

Ping and traceroute

Ping shows the latency to our network. Traceroute shows each network the traffic crosses on its way to San José, which helps find where a delay starts.

On macOS or Linux:

ping -c 20 speedtest.crservers.com
traceroute speedtest.crservers.com

On Windows, open Command Prompt:

ping -n 20 speedtest.crservers.com
tracert speedtest.crservers.com

If you have mtr, it combines both and is the most useful result to send us:

mtr -rwc 50 speedtest.crservers.com

The test server's address is 190.10.8.90. It answers ping, traceroute and the web page only.

Report a slow connection

If your site or server feels slow, open a support ticket and include:

  • Which service is affected, and the domain or IP address.
  • Where you are testing from (city and internet provider) and the time of the test.
  • The ping and traceroute results, or the mtr report, to speedtest.crservers.com. If you can, run the same tests to your own server's address too.
  • Your speed test result.

With this, our team can tell whether the delay is on our network, on the route in between or on the local connection, without asking you for the same tests again.

For dedicated servers and colocation, you can also follow the traffic on your own port in the client area: see Read your server's traffic graph.